Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World : Proceedings of the ITA-AITES World Tunnel Congress 2023 (WTC 2023), 12-18 May 2023, Athens, Greece.
| Main Author: | |
|---|---|
| Other Authors: | , |
| Format: | eBook |
| Language: | English |
| Published: |
Milton :
Taylor & Francis Group,
2023.
|
| Edition: | 1st ed. |
| Subjects: | |
| Online Access: | Click to View |
Table of Contents:
- Intro
- Preface
- Acknowledgements
- Committees
- Knowledge &
- passion to expand underground for sustainability and resilience
- A look at embodied carbon in segmental tunnel lining
- Urban underground space use in a climate neutral city
- ATG Ceneri Base Tunnel: Driving method and production of concrete aggregates
- BIM-enabled carbon accounting and integrated design of underground infrastructures
- What might be our vision of the ecological transition in tunnels and underground spaces for the years to come?
- Low carbon lining for tunnelling precast segment - How Dramix® fibre reinforced concrete could facilitate this achievement
- ADVANTEX: Research of innovative tools to support the logistics of the use of excavation materials produced by the Lyon-Turin railway line for the best sustainability and circular economy of the process
- Final design considerations for the major rehabilitation of the Montreal Lafontaine Tunnel
- Carbon footprint emissions of different tunneling construction methods
- Preliminary design and socio-economic benefits of a road tunnel construction in the Tzoumerka mountainous area
- Managing tunnel infrastructure: A new guideline
- Underground solution for urban resilience: Stormwater management infrastructure
- Advancement of conventional cost benefit for selection of truly sustainable infrastructure alternatives
- Practical countermeasures for road tunnels against collapse of lining caused by earthquake
- Sustainable and resilient city: The case study of a hypogeum stadium in a desert area
- Autostrade per l'Italia (ASPI) TRS Tunnel Renewal Strategy: The cases of Castello 1 left, San Fermo right and Colle Marino left tunnels
- Resins filling injections of an extensive system of voids behind the final lining of Monte Baldo highway tunnel.
- Shafts and spiral tunnels for large heat storages - an economic study on ideal geometries
- Waterproof sprayed concrete with improved sustainability performance
- Environmental profile of bentonite drilling fluids for civil engineering applications
- Experimental study on cyclic shear behavior of biopolymer-treated soil as a tunnel backfill material
- Search for potential compressed air energy storage sites in Switzerland
- Mixed use potential of existing road tunnels for conveying water for hydropower generation: A case study of motorway tunnels in Swat, Pakistan
- The new line 16 São Paulo Metro and Best use of zero-carbon technology
- On the mechanical behavior of underground pipeline with separated joints rehabilitated by cured in place pipe
- Low-carbon ground support design for an underground tunnel crossover with a narrow roof pillar in a road tunnel project in Sydney, Australia
- Traceability and environmental follow-up of excavated materials Learnings from implementation experiences with bigger projects
- Geological, geotechnical site investigation and ground characterization
- Televiewer defect aperture logging for detailed model development - A case study from the M8, Sydney, Australia
- Reliability analysis of discrete fracture network projections from borehole to shaft scale discontinuity data
- Which tests for a rapid geotechnical characterization of excavated materials for use as concrete aggregates? Application to the Lyon Turin base Tunnel
- Geotechnical analysis of adapted permeation and compaction grouting techniques for detailed design and construction of underground structures
- Mapping by pictures: A case study of simplified rock mass classification to improve consistency
- Equivalent material modelling of fractured rock mass resonance effects.
- Rheological properties of artificial sandy soil conditioned with foam and polymer
- Laboratory experiments for hazardous ground prediction ahead of a TBM tunnel face based on resistivity and induced polarization
- Tunnel portal design optimisation in tectonically disturbed and weathered gneissic rock masses
- Geostatistical modelling of geotechnical properties in the context of a tunneling project: Application to the Grand Paris Express project (France)
- Observations on the condition of a hydraulic pressure tunnel through an ROV survey
- Acoustic emission of calcitic and dolomitic rock specimens during uniaxial compression tests
- Innovative assessment methodologies to introduce rock mass behaviour into tunnelling - The legacy of Professor Paul Marinos in the Athens Metro
- Modelling total convergences in tunneling: An essay on Venda Nova III data
- The management of excavation data in accordance with the WBS for the Mont Cenis tunnel
- Hydrogeology of the Brenner Base Tunnel in the Italian section: Observed inflows and forward monitoring procedures
- Contribution of twenty years of exploratory work in the complex carboniferous formation of the montcenis base tunnel
- Characteristic of ground deformation with unsupported tunnel excavation in a sedimentary soft rock
- Innovative and conventional geophysical investigations at the Hamza bey (Alcazar) monument in Thessaloniki, Greece
- 3D Geo-modelling using geophysical tools to aid injection grouting
- Acceleration of soft ground with tunnels near soft-hard strata interface: Longitudinal shaking
- Optimization of electrical resistivity survey utilizing harmony search algorithm to predict anomalous zone ahead of tunnel face
- Planning and designing of tunnels and underground structures
- Design aspects of deep water distribution shafts
- Short-term tunnel face stability in clays.
- Preliminary comparison of the life cycle cost and safety of a single bore bidirectional tunnel including semitransverse ventilation, with a twin bore unidirectional tunnel of the same length longitudinally ventilated
- Tomography based method for investigation of steel fibre distribution in tunnel shotcrete
- 3D numerical modelling of a large shallow cavern in densely built-up area for Sydney metro
- Design and construction sequence of big crossover cavern in Himalayan Geology
- Parametric analysis of shotcrete lining capacity using an improved compressive membrane action model
- Pre-Cast linings for hydropower tunnels: Advantages and successes
- The Traditional method of madrid - a 2D SSI approach calibrated via 3D modelling
- Porto metro rubi line - the design of the conventional tunnels in residual soils
- Second tube of the Gotthard Road Tunnel: Tunnel design and challenges after 2 years of construction of the preparatory works
- The Glacier Garden in Lucerne gets a new main underground attraction
- Study of a large opening in a retaining wall by a TBM: Consequences on the ground and the structures, structural reinforcement solutions and impacts on neighboring constructions
- Significance of initial lining on dynamic performance of final lining for large size cavern
- Interaction between underground works and deep foundations. A risk assessment approach
- Design methodology for tunnel collars assessment under fire load
- Mechanical performance evaluation of operating shield tunnel segment under different ovality induced by underlying tunnel construction
- The fourth edition of the BTS/ICE specification for tunnelling
- Structural safety of tunnels in case of fire based on CFD simulations
- Effect of the rock mass disturbance due to the tunnel excavation on the tunnel loading, based on numerical simulation.
- Tunnel design guideline in cases of tunnel face pre-support by fiberglass nails and/or forepoling umbrella
- Use of the tunnel face stability factor in unsupported and supported tunnel faces
- The importance of axisymmetric simulations for the estimation of tunnel support pressure for sequentially supported deep tunnels
- Planning of the Tel Aviv Metro Network
- TBM excavation under existing operation railway: A practical example applied to the Brenner railway
- Thermal performance of a metro station in Turin equipped with energy geostructures
- Numerical simulation of the rock cutting process using the discrete element method
- Ground movement impacts on heritage buildings from trinocular cavern excavation at Town Hall station on the Melbourne Metro Tunnel Project
- Influence of construction joints on the mechanical behavior of linings in mountain tunnels acted on by external forces
- Highway tunnel design under river with shallow overburden-Terzili tunnel example
- A design approach of large diameter surge shaft and passageway connection between headrace tunnels
- Holistic largescale planning and optimization of urban subway works
- Ensuring face support and control of surface deformations in soft ground urban tunnels: Verification through international case studies
- Using a vermiculite-based fire protection mortar to increase the fire resistance of reinforced concrete tunnels
- Settlement trough estimation over TBM EPB tunnel
- Effect of rock heterogeneity on the convergence-confinement curve during numerical analysis of underground excavation in discontinuous rock mass
- Curved diaphragm wall construction: A case study on the challenges faced
- The excavation of the Brenner Base Tunnel where the Eurasian and Adriatic tectonic plates collide
- Design of porous tunnel for ecosystem protection in High Speed Two railway in UK.
- Structural analysis model of joints in steel segment shield tunnel for 3D FEM.