Cover Image

Manufacturing Driving Circular Economy : Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin.

Bibliographic Details
Main Author: Kohl, Holger.
Other Authors: Seliger, Günther., Dietrich, Franz.
Format: eBook
Language:English
Published: Cham : Springer International Publishing AG, 2023.
Edition:1st ed.
Series:Lecture Notes in Mechanical Engineering Series
Subjects:
Electronic books.
Online Access:Click to View
Table of Contents:
  • Intro
  • Preface
  • Organization
  • Contents
  • Manufacturing Processes
  • 3D-Printed MWF Nozzles for Improved Energy Efficiency and Performance During Grinding
  • 1 Introduction
  • 2 Materials and Methods
  • 2.1 MWF Supply Nozzles
  • 2.2 Experimental Setup and Analysis
  • 3 Results and Discussion
  • 4 Conclusions
  • References
  • Model-Based Correlation Analysis of Machine Control Parameters and Process Vibration Amplitudes by the Example of Milling
  • 1 Introduction
  • 2 State of the Art
  • 2.1 Cutting Forces and Vibration Modeling
  • 2.2 Process Vibration Reducing Techniques
  • 3 Milling Process Modeling with Cascade Control
  • 4 Experimental Results and Model Validation
  • 4.1 Experimental Setup
  • 4.2 Comparison of Experimental and Simulation Results
  • 5 Correlation Analysis of Control Parameters and Vibration Amplitudes
  • 6 Summary and Outlook
  • References
  • A Comparative Sustainability Assessment of Cutting Fluids Usage in Band Sawing
  • 1 Introduction
  • 2 Literature Review
  • 3 Cutting Fluid Usage Band Sawing: Global Case Studies
  • 3.1 Economic Analysis
  • 3.2 Sustainability Index (SI) Evaluation
  • 4 Conclusions
  • References
  • Design and Characterization of Piezoceramic Thick Film Sensor for Measuring Cutting Forces in Turning Processes
  • 1 Introduction
  • 2 Sensor Design and Simulation
  • 3 Characterization
  • 3.1 Static Calibration
  • 3.2 Dynamic Characterization
  • 4 Cutting Tests
  • 5 Conclusion and Future Work
  • References
  • The Costs of More Sustainable Castings Can we Afford the Change?
  • 1 Introduction
  • 2 Methods
  • 2.1 Definition of the Process Chain
  • 2.2 Absorbing Markov Chain Model
  • 2.3 Investigated Energy Sources
  • 2.4 Definition of the Evaluation Criteria
  • 3 Results and Discussion
  • 3.1 Mass-Specific Efficiencies of the Investigated Setups
  • 3.2 Setup-Specific Emissions
  • 3.3 Setup-Specific Costs.
  • 4 Conclusion and Outlook
  • References
  • Supply Chain and Remanufacturing
  • reProd® - Resource-Autarkic Production Based on Secondary Semi-finished Products
  • 1 The reProd® Approach
  • 1.1 Metallic Cycle and the Idea of reProd®
  • 1.2 The reProd® Approach
  • 1.3 The reProd®-cycle
  • 1.4 Feasibility Studies
  • 2 Engineering and Processing Secondary Semi-finished Products into New Parts
  • 2.1 Geometric Properties
  • 2.2 Mechanical Properties
  • 2.3 Process Design Workflow
  • 3 Outlook - the Potentials of a Digital Chain
  • 3.1 Digital Shadow as Missing Link Between the nth- and the Next Product Life Cycle
  • References
  • Reducing Remanufacturing Uncertainties with the Digital Product Passport
  • 1 Introduction
  • 2 Literature Review
  • 2.1 Uncertainties in Remanufacturing
  • 2.2 The Digital Product Passport
  • 2.3 Transparent and Secure Infrastructure and Proper Governance
  • 3 Possibilities for Uncertainty Reduction with the DPP
  • 4 Simulation Model of a Real Remanufacturing System
  • 5 Summary and Future Work
  • References
  • Digital Supply Chain Twins for Sustainable Planning of a Logistics System
  • 1 Introduction
  • 2 Theoretical Background
  • 2.1 Conceptual Clarification of Digital Supply Chain Twins
  • 2.2 Scopes of Digital Twins and Digital Supply Chain Twins
  • 2.3 Planning
  • 3 Research Design
  • 4 Discussion of Results
  • 5 Conclusion and Final Remarks
  • References
  • Optimization of a Remanufacturing Production Planning System with the Help of Artificial Intelligence
  • 1 Introduction
  • 1.1 Motivation of This Research
  • 2 Literature Review
  • 2.1 State of the Art
  • 3 Methods
  • 4 Simulation Model of a Real Remanufacturing Application
  • 5 Optimization
  • 6 Results and Limitations
  • 7 Conclusion
  • References
  • Circular Supply Chain Management in the Wind Energy Industry - A Systematic Literature Review
  • 1 Introduction.
  • 2 Current State of Research
  • 3 Research Methodology
  • 4 Results
  • 5 Conclusion and Future Research Agenda
  • References
  • Analysis of Elementary Technology Considering the Remanufacturing of Used Machinery: A Case Study
  • 1 Introduction
  • 2 Research Method
  • 3 Results
  • 3.1 Injection Molding Machine
  • 3.2 CNC Lathe Machine
  • 4 Summary
  • References
  • Measurement of Disassembly Work Using Optical Motion Capture
  • 1 Introduction
  • 2 Method
  • 3 Results
  • 3.1 Result of Disassembly Time
  • 3.2 Results of Movements Measured
  • 3.3 Discussion
  • 4 Summary and Future Studies
  • References
  • Simulation-Based Analysis of (Reverse) Supply Chains in Circular Product-Service-Systems
  • 1 Introduction
  • 2 Related Work
  • 3 Methodology
  • 4 Case Study
  • 4.1 Task and System Analysis
  • 4.2 Model Formulation
  • 4.3 Model Implementation and Verification
  • 4.4 Model Application
  • 5 Conclusion and Outlook
  • References
  • Concept of Sustainable Supply Chain Management Using Multi-agent System: Negotiation by Linear Physical Programming
  • 1 Introduction
  • 2 SSC Model Construction Using a Multi-agent System
  • 2.1 Effectiveness of Multi-agent System for ISSCM
  • 2.2 SSC Model Construction
  • 3 Agent Decision-Making Process Through Negotiation
  • 3.1 Suriawase Process
  • 3.2 Linear Physical Programming
  • 3.3 Decision-Making Flow of Each Agent
  • 4 Conclusion
  • References
  • Designing a Reverse Supply Chain Network for Smartphones with Material-Based GHG Emissions and Costs Using Linear Physical Programming
  • 1 Introduction
  • 2 Model and Formulation
  • 2.1 Model
  • 2.2 Variables and Parameters
  • 3 Case Study
  • 4 Result
  • 5 Conclusion
  • References
  • Machine Tools
  • Influence of Additivation of Bio-Based Lubricants on Sprayability and Solubility for Cryogenic Minimum Quantity Lubrication
  • 1 Introduction
  • 2 State of the Art.
  • 2.1 Bio-Based Lubricants
  • 2.2 Characterization of Lubricant Additives
  • 2.3 Solubility of Bio-Based Lubricants in CO2
  • 2.4 CMQL with Bio-Based Lubricant
  • 3 Experimental Setup
  • 3.1 CMQL-System and Oils
  • 3.2 Solubility and Sprayability
  • 4 Results
  • 4.1 Solubility and Sprayability
  • 4.2 Correlation with Milling Process
  • 5 Summary
  • References
  • Potential of Radar Based Measuring Systems in Hot Forging
  • 1 Introduction
  • 2 Procedure and Methods
  • 3 Results
  • 3.1 Scenario 1 &gt
  • &gt
  • Position&lt
  • &lt
  • 3.2 Scenario 2 &gt
  • &gt
  • Distance&lt
  • &lt
  • 3.3 Evaluation Line Measurement
  • 4 Discussion and Conclusion
  • References
  • Evaluation of Thermal Error Compensation Strategies Regarding Their Influence on Accuracy and Energy Efficiency of Machine Tools
  • 1 Introduction and Motivation
  • 2 Energy-Efficient Manufacturing Technology
  • 3 Thermal Error Compensation
  • 4 Conclusion and Outlook
  • References
  • Investigation of Cutting Force and Surface Quality in Frozen Wood Sawing Under Varying Influencing Factors to Improve the Energy- and Resource Efficiency of Sawing Processes
  • 1 Introduction
  • 2 State of the Art
  • 2.1 Wood as a Material
  • 2.2 Sawing Frozen Wood
  • 2.3 Surface Quality of Sawn Wood
  • 3 Approach and Experimental Detail
  • 4 Results and Discussion
  • 4.1 Cutting Force
  • 4.2 Surface Quality
  • 5 Conclusion and Outlook
  • References
  • revolPET®: An Innovative "Back-to-Monomer" Recycling Technology for the Open Loop Value Chain of PET and Polyester Composite Packaging and Textiles
  • 1 Introduction
  • 1.1 State of the Art (Depolymerization of PET)
  • 1.2 The Background of the revolPET Technology
  • 2 Materials and Methods
  • 2.1 Process Concept and Experimental Setup
  • 2.2 Environmental Assessment of the revolPET Process
  • 3 Results and Discussion
  • 3.1 Process and Technology-Related Results.
  • 3.2 Environmental Assessment of the revolPET Process in the Current TRL
  • 4 Conclusions and Outlook
  • References
  • Development of a Pneumatic Clamping System with Position and Force Control Machining
  • 1 Introductions
  • 1.1 State of the Art
  • 1.2 Definition of Goals
  • 2 The Developed Position and Force-Controlled Clamping System
  • 2.1 Features and Functions
  • 2.2 Force and Pressure Control of Clamping Forces
  • 2.3 FEA of Thin-Walled Workpiece
  • 2.4 Combination of Force Control, Vision Device and Motion Control Algorithm
  • 3 Test Procedure and Test Results
  • 3.1 The Vision Device for Position Recognition and Repositioning
  • 3.2 Accuracy and Repeatability of the CNC Machine Tool
  • 3.3 Force Measurements with a Kistler Device as a Function of Air Pressure
  • 4 Conclusions and Further Developments
  • References
  • Initial Period of Chip Formation: Observations Towards Enhancing Machining Sustainability
  • 1 Introduction
  • 2 Methodology
  • 2.1 Tools and Materials
  • 2.2 2D Chip Formation Simulations
  • 3 Results and Discussions
  • 3.1 Initial Chip Formation and Correlated Low Tool-Chip Contact
  • 3.2 Interrupted Machining
  • 3.3 2D Chip Formation Simulations
  • 4 Conclusion
  • References
  • Influence of Carbon Dioxide Temperature on Sprayability and Solubility in Cryogenic Minimum Quantity Lubrication with Bio-Based Lubricants
  • 1 Introduction
  • 2 State of the Art
  • 2.1 Cryogenic Minimung Quantity Lubrication with Bio-Based Oils
  • 2.2 Properties of Carbon Dioxide
  • 3 Experimental Setup
  • 3.1 Cryogenic Mixing System with Temperature-controlled Carbon Dioxide
  • 3.2 Base Oils
  • 3.3 Dynamic Solubility and Spray Pattern Tests
  • 4 Results
  • 5 Summary
  • References
  • Sustainability Enhancement of the Coal Based Direct Reduction of Iron Premised on a Rotary Kiln
  • 1 Introduction
  • 1.1 The DRI Process.
  • 2 Circular Economy in Systems Thinking for Sustainability of the DRI Process.

Similar Items