Mare-Wint : New Materials and Reliability in Offshore Wind Turbine Technology.
| Main Author: | |
|---|---|
| Other Authors: | , , |
| Format: | eBook |
| Language: | English |
| Published: |
Cham :
Springer International Publishing AG,
2016.
|
| Edition: | 1st ed. |
| Subjects: | |
| Online Access: | Click to View |
Table of Contents:
- Intro
- Acknowledgements
- The European Commission
- About MSCA
- About ITN
- The External Contributors
- The MARE-WINT Fellows and Project Partners
- References
- Contents
- 1 Introduction
- 1.1 The Emergent Offshore Wind Industry
- 1.1.1 The Benefits of Wind Energy
- 1.1.2 The Challenges of Going Offshore
- 1.2 An Introduction to the MARE-WINT Project
- 1.3 An Overview of the Current Research
- 1.3.1 The Components of a Wind Turbine
- 1.3.2 Designing a Wind Turbine
- 1.3.3 MARE-WINT's Contribution to the Offshore Wind Industry
- 1.3.4 Contributions from External Authors
- References
- Part I Wind Turbine Blades
- 2 Design of Wind Turbine Blades
- 2.1 Rotor Blades as a Common Research Topic
- 2.2 General Background for WT Blades
- 2.3 Innovative Blade Concept
- 2.4 Operational Concept
- 2.5 Research and Development Work Supporting the Concept
- References
- 3 Damage Sensing in Blades
- 3.1 Introduction
- 3.2 Structural Damages in Wind Turbine Blades
- 3.3 SHM on Wind Turbine Blades
- 3.3.1 Modal Analysis
- 3.3.2 Fibre Optics
- 3.3.3 Guided Wave Technology
- 3.3.4 Acoustic Emission
- 3.3.5 Thermography
- 3.4 Guided Wave Technology in Composites
- 3.4.1 Fundamentals of Guided Waves
- 3.4.1.1 Phase Velocity and Group Velocity
- 3.4.1.2 Dispersion Curves
- 3.4.2 Guided Waves in Composites
- 3.4.2.1 Simulation
- 3.4.2.2 Damage Detection
- References
- 4 Fibre Bragg Grating as a Multi-Stage Structure Health Monitoring Sensor
- 4.1 Fibre Bragg Grating Sensors
- 4.2 Manufacturing Stage: Residual Stress Induced by Resin Shrinkage and Curing Process Control
- 4.2.1 Embedded FBG Response to Strain and Temperature Variation
- 4.2.2 Residual Stress Measurement
- 4.3 Operation Stage: Crack Growth Detection by Embedded FBG Sensors
- 4.3.1 Crack/Delamination Detection by Embedded Fibre Bragg Gratings.
- 4.3.1.1 Embedded FBG Response: Strain
- 4.3.1.2 Embedded FBG Response: Transverse Stress
- 4.3.1.3 Embedded FBG Response: Non-Uniform Strain
- 4.3.2 Delamination Detection in Fibre Reinforced Polymer Specimen Using Embedded FBG Sensor: Material and Testing Procedure
- 4.3.2.1 Experimental Results
- 4.4 Application of the FBG Crack Detection Method
- 4.5 Fibre Bragg Grating as a Multi-Stage Structure Health Monitoring Sensor: Published Work
- References
- 5 Analysis and Design of Bend-Twist Coupled WindTurbine Blades
- 5.1 Introduction
- 5.2 Analysis of Anisotropic Beams
- 5.2.1 Structural Properties of Anisotropic Beams
- 5.2.1.1 Shear Deformations
- 5.2.1.2 Torsional Warping
- 5.2.1.3 General Warping
- 5.2.1.4 Superelements
- 5.2.1.5 Large Displacements
- 5.2.1.6 Wind Turbine Blade Analysis
- 5.2.2 Anisotropic Cross-Sectional Properties
- 5.2.3 Timoshenko Beam Element with Anisotropic Cross-Sectional Properties
- 5.3 Design of Bend-Twist Coupled Blades
- 5.3.1 Pre-Twisting Procedure
- 5.3.2 Coupling Distribution
- 5.4 Summary
- References
- 6 Improvement of Wind Turbine Blade Performance by Means of Rod Vortex Generators
- 6.1 Introduction
- 6.2 Flow Solver
- 6.3 The NREL Phase VI Wind Turbine Rotor
- 6.3.1 Experimental Set-Up
- 6.3.2 Numerical Modelling
- 6.3.3 Numerical Results
- 6.4 The S809 Aerofoil (Clean Case)
- 6.5 The S809 Aerofoil (Flow Control Case)
- 6.5.1 Basic Configuration
- 6.5.2 RVGs Chordwise Location
- 6.5.3 RVGs Spanwise Separation
- 6.6 Conclusions
- References
- 7 Trailing and Leading Edge Flaps for Load Alleviation and Structure Control
- 7.1 Numerical Methods
- 7.2 Numerical Parameters
- 7.3 Mesh Convergence Study
- 7.4 Computational Grid
- 7.5 Definition of the Flaps
- 7.6 Results for the TE Flap
- 7.7 Results for the LE Flap
- 7.8 Comparison of the Performance
- 7.9 Summary.
- References
- Part II Enabling Technologies for Drivetrain and Gearbox Analysis
- 8 OWT Drivetrain &
- Gearbox Simulation and Testing
- 8.1 Simulation and Testing in Drivetrain and Gearbox Design
- References
- 9 Dynamic Behavior of Bearings on Offshore Wind Turbine Gearboxes
- 9.1 Introduction
- 9.2 Bearings for Wind Turbine Applications
- 9.2.1 Rolling-Element Bearings: Basic Concepts
- 9.2.2 Contact Mechanics
- 9.2.3 Influence of the Lubricant Film
- 9.2.4 Durability
- 9.2.5 Non Torque Loading
- 9.3 Numerical Modelling of Bearings
- 9.3.1 Overview of State-of-the-Art Bearing Models
- 9.3.2 Two-Dimensional Bearing Models
- 9.3.3 Three-Dimensional Bearing Models
- 9.3.3.1 Ball Bearings
- 9.3.3.2 Roller Bearings
- 9.3.4 Bearings with Distributed Flexibility
- 9.4 Conclusions: Towards Unified Wind Turbine Gearbox Models
- References
- 10 Experimental Characterization of Wind Turbine Gearbox in Operation
- 10.1 Introduction and Motivation
- 10.2 Order Tracking Techniques
- 10.2.1 Time Domain Sampling-Based Fast Fourier Transform Order Tracking
- 10.2.2 Angle Domain Resampling Order Tracking
- 10.2.3 Time Varying Discrete Fourier Transform (TVDFT)
- 10.2.4 Vold-Kalman (VK) Filter-Based Order Tracking
- 10.3 Order-Based Modal Analysis
- 10.4 Dynamic Characterization of Operational Gearboxes
- 10.4.1 Operational Modal Analysis
- 10.4.2 Order-Based Modal Analysis
- 10.5 Conclusions
- References
- Part III Tower &
- Support Structure
- 11 An Overview of Analysis and Design of Offshore Wind Turbines
- 11.1 Introduction
- 11.2 Research Activities in the MARE-WINT Project
- 12 Dynamic Response Analysis of Floating Wind Turbines with Emphasis on Vertical Axis Rotors
- 12.1 Introduction
- 12.2 Typical Floating VAWT Concepts
- 12.3 Integrated Modeling of a Floating VAWT System
- 12.3.1 Aerodynamics.
- 12.3.2 Hydrodynamics
- 12.3.3 Structural Dynamics
- 12.3.4 Control System
- 12.3.5 Verification of the Fully Coupled Codes
- 12.4 Dynamic Response Characteristics of Three Floating VAWTs
- 12.5 Comparative Study of Floating HAWTs and VAWTs
- 12.5.1 Semi HAWT vs. Semi VAWT
- 12.5.2 Spar HAWT vs. Spar VAWT
- 12.6 Conclusions
- References
- 13 Bottom Fixed Substructure Analysis, Model Testing and Design for Harsh Environment
- 13.1 Introduction
- 13.2 Determination of Design Wave
- 13.3 Hydrodynamic Loads
- 13.4 Analytical and Empirical Formulations
- 13.4.1 Morison Equation
- 13.4.2 Higher Harmonic Forces
- 13.4.3 Impulse (Slam) Forces from Breaking Waves
- 13.5 Numerical Analysis
- 13.5.1 Star CCM++
- 13.5.2 OceanWave3D: OpenFoam
- 13.6 Results
- 13.6.1 Stokes 5th Order
- 13.6.2 Breaking Wave
- 13.7 Conclusions
- References
- 14 Detection of Damage in Metallic Structures for Offshore Applications
- 14.1 Introduction
- 14.2 Methodology Overview
- 14.2.1 Neutral Axis
- 14.2.2 Damage Sensitive Feature
- 14.2.3 Bi-Axial NA tracking
- 14.2.4 Kalman Filter
- 14.3 Structure Modelling
- 14.3.1 DTU 10 MW RWT
- 14.3.2 Nordtank NTK 500/41 Wind Turbine
- 14.4 Numerical Simulations
- 14.4.1 Need for KF tracking
- 14.4.2 NA as a Damage Sensitive Feature
- 14.4.3 Bi-axial NA tracking
- 14.4.4 Robustness of KF
- 14.5 Validation
- 14.5.1 Need for KF Based NA Tracking
- 14.6 Conclusions
- References
- Part IV Reliability &
- Preventive Maintenance of Offshore Wind Turbines
- 15 Reliability and Preventive Maintenance
- Nomenclature
- Acronyms
- Definitions
- 15.1 Overview
- 15.2 Offshore Wind Turbine Configuration
- 15.3 Reliability Prediction
- 15.3.1 Definition and Assumptions
- 15.3.2 Reliability Prediction Data-Base
- 15.3.2.1 Reliawind Data-Base
- 15.3.2.2 Conversion Factor.
- 15.3.3 Reliability Prediction Results
- 15.4 Reliability Block Diagram
- 15.4.1 Definition and Assumptions
- 15.4.2 Inherent Availability
- 15.4.3 Reliability Block Diagram Results
- 15.5 Failure Mode, Effects and Criticality Analysis
- 15.5.1 Definition
- 15.5.2 Objectives
- 15.5.3 Method
- 15.5.4 Approach
- 15.5.5 Criticality
- 15.5.6 Process
- 15.5.7 Limitations
- 15.5.8 Results
- 15.5.8.1 Risk Matrix and Criticality Evaluation
- 15.5.8.2 Mode Criticalities at System Level
- 15.5.8.3 Risk Priority Number (RPN)
- 15.6 Preventive Maintenance (PM)
- 15.6.1 Definition
- 15.6.2 Preventive Maintenance Tasks Classification
- 15.6.2.1 Scheduled Tasks
- 15.6.2.2 On Condition Task
- 15.6.3 Significant Function Selection
- 15.6.3.1 Significant Function (SF) Logic
- 15.6.4 Task Evaluation
- 15.6.5 Task Selection
- 15.6.5.1 Cost
- 15.6.5.2 Operational Consequences
- 15.6.6 Packaging
- 15.6.7 Age Exploration (AE)
- 15.6.8 Repackaging
- 15.7 Conclusions
- References
- Part V CFD Analysis of a Complete Offshore Wind Turbine
- 16 An Overview of the CFD Analyses in the MARE-WINT Project
- 17 CFD Investigation of a Complete Floating OffshoreWind Turbine
- Nomenclature
- Latin
- Greek
- Acronyms
- 17.1 Motivation and Objectives
- 17.2 Numerical Methods
- 17.2.1 Validation of the Aerodynamic Solver
- 17.2.2 Validation of the Hydrodynamic Solver
- 17.2.3 Validation of Multi-body Dynamics Solver
- 17.2.4 Coupling Algorithms
- 17.2.5 Coupling Scheme and Its Implementation
- 17.3 Test Case Description
- 17.3.1 CFD Mesh
- 17.3.2 SPH Setup and Resolution
- 17.3.3 Initial Conditions
- 17.3.4 Demonstration Cases
- 17.4 Results and Discussion
- 17.4.1 Decoupled Case
- 17.4.2 Coupled Case
- 17.4.3 Computational Performance
- 17.5 Conclusions
- References.
- 18 CFD Study of DTU 10MW RWT Aeroelasticity and Rotor-Tower Interactions.


