High Luminosity Large Hadron Collider, The : The New Machine For Illuminating The Mysteries Of Universe.
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | eBook |
| Language: | English |
| Published: |
Singapore :
World Scientific Publishing Company,
2015.
|
| Edition: | 1st ed. |
| Series: | Advanced Series On Directions In High Energy Physics
|
| Subjects: | |
| Online Access: | Click to View |
Table of Contents:
- Intro
- Contents
- Foreword
- Preface
- List of Authors
- Chapter 1 Introduction to the HL-LHC Project
- 1. Context and Objectives
- 2. Approach for the Upgrade
- 2.1. Present luminosity limitations and hardware constraints
- 2.2. Upgraded systems for the high luminosity
- 2.2.1. Luminosity leveling and availability
- 2.2.2. Upgrade parameters
- 2.3. Project: performance, plan and cost
- 2.4. The international collaboration
- References
- Chapter 2 The Physics Landscape of the High Luminosity LHC
- 1. Introduction
- 1.1. Status and prospects of Higgs studies
- 1.2. Status and prospects of BSM searches
- 1.3. Additional remarks
- References
- Chapter 3 The HL-LHC Machine
- 1. HL-LHC Baseline Parameters
- 2. Alternative Options
- 3. HL-LHC the Geographical Distribution of the Upgrade Interventions
- 3.1. Point 4
- 3.2. Point 7
- 3.2.1. The horizontal superconducting links
- 3.2.2. New collimators in the dispersion suppressor
- 3.3. Point 2
- 3.4. Point 6
- 3.5. Point 1 and Point 5
- 3.5.1. LHC machine tunnel
- 3.5.2. Existing LHC tunnel service areas
- 3.5.3. New HL-LHC tunnel service areas
- 3.5.4. New connection from the LHC tunnel and HL-LHC service areas to the surface
- 3.5.5. New surface installation
- 4. Schedule
- References
- Chapter 4 The HL-LHC Accelerator Physics Challenges
- 1. Introduction and General Description
- 1.1. Optics
- 1.1.1. Optics constraints and challenges
- 1.1.2. The Achromatic Telescopic Squeezing (ATS) scheme as baseline for the HL-LHC optics
- 1.1.3. Crossing angle and crab cavities
- 1.1.4. Layout and mechanical aperture
- 1.1.5. Dynamic aperture
- 1.2. Collective effects
- 1.2.1. Present LHC Impedance
- 1.2.2. HL-LHC impedance
- 1.2.3. Landau damping
- 1.2.4. Synchrotron radiation and electron cloud
- 1.2.5. Intra-beam scattering
- 1.2.6. Touschek scattering.
- 1.2.7. Beam-beam effects
- 1.3. Dealing with pile up limits
- 1.3.1. Detector limitations
- 1.3.2. Luminosity leveling
- 1.4. Summary and conclusions
- Acknowledgments
- References
- Chapter 5 Interface with Experimental Detector in the High Luminosity Run
- 1. Introduction
- 2. Overview of the Main Changes Relevant for the Experiments
- 3. Experimental Beam-pipes
- 4. TAS, TAN
- 5. Failure Scenarios and Experiments Protection
- 6. Machine Induced Backgrounds
- References
- Chapter 6 Superconducting Magnet Technology for the Upgrade
- 1. Targets
- 2. Constraints
- 2.1. Radiation damage and heat load
- 2.2. Field quality
- 2.3. Fringe field and magnet size
- 3. Main Design Choices
- 3.1. Foreword: Loadline, critical surface and margin
- 3.2. Technology, operational temperature, margin
- 3.3. Coil width and stress
- 3.4. Cryostats and interconnections
- 3.5. Cooling
- 4. The Triplet Quadrupoles Q1-Q3
- 4.1. Historical development
- 4.2. Strand and cable
- 4.3. Coil
- 4.4. Mechanical structure
- 4.5. Protection
- 4.6. Field quality and shimming
- 5. Correctors
- 5.1. Orbit correctors
- 5.2. Linear and nonlinear correctors
- 6. The Separation Dipole D1
- 7. The Recombination Dipole D2
- 8. The Large Aperture Two-in-One Quadrupole
- References
- Chapter 7 Crab Cavity Development
- 1. Crab Cavities
- 2. Global and Local Schemes
- 3. Technology Choice and Spatial Constraints
- 4. Compact Cavity Design Options
- 5. Present Status of Prototype Cavities
- 6. RF Multipoles, Coupler Kicks and Limits
- 7. Frequency Tuning System
- 8. RF System and Controls
- 8.1. Beam loading and RF power requirement
- 8.2. Power amplifier and input coupler
- 8.3. RF controls and machine protection
- 8.4. RF noise and stability
- 8.5. Impedance budget and higher order mode damping
- 8.6. Cavity transparency and operation.
- 9. Integration into SPS and LHC
- 9.1. SPS-BA4 test setup
- 9.2. LHC integration constraints
- 9.3. Positioning and alignment
- References
- Chapter 8 Powering the Hi-Luminosity Triplets
- 1. Introduction
- 2. Powering the High-Luminosity Triplets
- 3. Cold Powering System
- 4. Conclusions
- References
- Chapter 9 Cryogenics for HL-LHC
- 1. Introduction
- 2. LHC Machine Upgrades
- 2.1. Upgraded beam parameters and constraints
- 3. Temperature Level and Heat Loads
- 4. Impact on Existing Sector Cryogenic Plants
- 5. New Cryogenics for P4 Insertion
- 6. New Cryogenics for High-Luminosity Insertions at P1 and P5
- 7. Building and General Service Requirement
- 8. Conclusion
- References
- Chapter 10 The "Environmental" Challenges: Impact of Radiation on Machine Components
- 1. Collision Debris
- 2. Beamline Model
- 3. Radiation Capture
- 4. Energy Deposition
- 5. Radiation to Electronics
- References
- Chapter 11 Radiation Protection Considerations
- 1. Radiological Quantities
- 2. Regulatory Framework, Design Limits and Dose Objectives
- 2.1. Justification, optimization, limitation
- 2.2. Design constraints
- 2.3. ALARA and dose objectives
- 3. The FLUKA Monte Carlo Code for Radiation Protection Studies
- 4. Benchmark of Radiological Assessments with Measurements
- 5. Estimation of Residual Dose Rates Around ATLAS Until LS3
- References
- Chapter 12 Machine Protection with a 700 MJ Beam
- 1. Introduction
- 2. Present Performance of LHC Machine Protection and Future Challenges with HL-LHC Beams
- 2.1. Ultra-fast failures
- 2.2. Fast failures
- 2.3. UFOs
- 2.4. Slow failures
- References
- Chapter 13 Cleaning Insertions and Collimation Challenges
- 1. Present LHC Collimation
- 1.1. Introduction to LHC multi-stage collimation
- 1.2. Brief recapitulation of collimation performance in LHC Run 1.
- 1.3. Preliminary LHC intensity reach from collimation
- 1.4. Challenges of HL-LHC parameters
- 2. Present and Future Collimator Design Concepts
- 2.1. Collimator design for precision and robustness
- 2.2. Collimator with embedded beam position monitors
- 2.3. Rotatory collimator design
- 2.4. Status of R&
- D on novel advanced collimator materials
- 3. Improved Cleaning of Dispersion Suppressor Losses
- 3.1. Introduction to local DS collimation
- 3.2. DS collimation solutions for proton and ion cases
- 3.3. Status of prototyping and design
- 4. Advanced Collimation Concepts for HL-LHC
- 4.1. Halo diffusion control techniques
- 4.2. Crystal collimation
- 4.3. Improved optics scenarios for the collimation insertions
- References
- Chapter 14 Long-Range Beam-Beam Compensation Using Wires
- 1. Motivation
- 2. Compensation Scheme
- 3. CERN SPS Wire Compensators
- 4. Scaling Laws
- 5. History of SPS BBLR Studies
- 6. Technical Issues
- 7. Single BBLR 'Excitation' Studies
- 8. Studies for Wire Compensators in the LHC
- 9. Simulation Results
- 10. Demonstrator Setup
- 11. Conclusions and Outlook
- Acknowledgments
- References
- Chapter 15 Impedance and Component Heating
- 1. Introduction
- 2. 2010-2012 Experience
- 2.1. Transverse impedance model and beam instability
- 2.2. Beam-induced RF heating
- 3. Expected Situation During the HL-LHC Era
- References
- Chapter 16 Challenges and Plans for the Proton Injectors
- 1. Introduction
- 2. Present LHC Proton Injectors
- 2.1. Description
- 2.2. Present performance and future needs
- 3. Upgrade Plan of the LHC Proton Injector Complex
- 3.1. Transverse phase planes
- 3.2. Longitudinal phase plane
- 3.3. Electron clouds
- 3.4. Other upgrades
- 4. Estimated Performance of the Upgraded LHC Proton Injector Complex
- References.
- Chapter 17 New Injectors: The Linac4 Project and the New H- Source
- 1. Introduction
- 2. Parameters, General Design and Layout
- 3. Challenges of the Ion Source
- 4. Challenges of the 3 MeV Injector
- 5. Challenges of the Accelerating Structures
- 6. Infrastructure and Operational Challenges
- References
- Chapter 18 Challenges and Plans for the Ion Injectors
- 1. Introduction
- 2. The Current Scheme
- 2.1. The ion accelerator chain
- 2.2. Production of the bunch trains for the LHC
- 3. Planned Upgrades
- 3.1. Doubling the repetition rate of Linac3
- 3.2. Overcoming the intensity limitation in LEIR
- 3.3. Bunch splitting in the PS
- 3.4. New injection scheme into the SPS
- 3.5. Momentum slip-stacking in the SPS
- 4. The Upgraded Filling Scheme
- References
- Chapter 19 Challenges and Plans for Injection and Beam Dump
- 1. Introduction
- 2. Protection Against Injection Errors
- 3. Injection Kicker MKI Performances
- 3.1. Beam induced heating of ferrite yoke
- 3.2. Cooling of ferrite yoke
- 3.3. Ferrite toroid heating
- 3.4. Surface flashover of ceramic tube
- 3.5. Electron cloud
- 3.6. Fast transient beamlosses (UFOs)
- 3.7. Possible future upgrades and ongoing R&
- D
- 4. Beam Loss Control at Injection
- 5. Beam Dump System Performance Reach
- 6. Protection Against Beam Dumping Errors
- 7. Beam Dump Kicker Performance Upgrades
- Acknowledgments
- References
- Chapter 20 Beam Instrumentation and Diagnostics for the LHC Upgrade
- 1. Introduction
- 2. Beam Loss Measurement for HL-LHC
- 2.1. Beam loss monitors for the HL-LHC triplet magnets
- 2.2. A radiation tolerant ASIC for the HL-LHC beam loss monitoring system
- 3. Beam Position Monitoring for the HL-LHC
- 3.1. Current performance and limitations
- 3.2. A high resolution orbit measurement system for HL-LHC.
- 3.3. High directivity strip-line pick-ups for the HL-LHC insertion regions.


